Description

Lift Werx is proud to offer the Atlas Garage PRO8000, our most popular 4-post hobbyist lift. This top-of-the-line lift is perfect for the customer with too many cars and insufficient space. The Garage PRO8000 allows users to quickly double their space by stacking most passenger cars.

The Atlas Garage PRO series of 4-post lifts (8,000 lb. capacity) are designed and built for use by homeowners or restoration shops. These heavy-duty lifts are Powder Coated for superior durability and long life. They feature a wide variety of safety and convenience features, making them the perfect choice for the discerning customer.

The Atlas Garage PRO8000 includes free plastic drip trays, a free steel jack tray, and a free caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes, making the lift portable and allowing it to move between bays or outside. All that makes the Garage PRO8000 one of the best-valued 4-post lifts on the market.

Requirements

Foundation And Anchoring Requirements

1. Concrete shall have a compression strength of at least 3,000 PSI and a minimum thickness of 4” to achieve a minimum anchor embedment of 3 ¼”. NOTE: When using (¾” x 5 ½”) long anchors, if the top of the anchor exceeds 2 ¼” above the floor grade, you DO NOT have enough embedment.

2. Maintain a 6” minimum distance from any slab edge or seam. Hole-to-hole spacing should be a minimum of 6 ½” in any direction. The hole depth should be a minimum of 4”.

3. Shim each column base as required until each column is plumb. If one column has to be elevated to match the plane of the other column, full-size base shim plates should be used. Torque anchors to 110 ft-lbs. Shim thickness MUST NOT exceed ½” when using the 5 ½” long anchors with the lift. Adjust the column extensions plumb.

4. If anchors do not tighten to 110 ft-lbs. Installation torque, replace the concrete under each column base with a 4’ x 4’ x 6” thick 3,000 PSI minimum concrete pad keyed under and flush with the top of the existing floor. Allow the concrete to cure before installing lifts and anchors (typically 2 to 3 weeks).

Additional Features

• 8,000 lb. Capacity
• Free Standing/Portable Design
• Diamond Plated Runways
• Single-Point Lock Release
• Lock Ladder Design
• Double Lock Safety System
• Caster Kit With Polyurethane Wheels Included
• Steel Approach Ramps Included
• Steel Jack Tray Included
• 4 Plastic Drip Trays Included
• 4 Wheel Stops Included
• 2 Rubber Wheel Chocks Included
• Perfect For Storing Or Working On Vehicles
• 110volt Electric Operation (30 AMP BREAKER REQUIRED)
• Shipping Weight 1,800 lbs.
• 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

More from the manufacturer here.