Atlas PVL10 Car Lift – 10,000 lb. Capacity

SKU: ATEAP-PVL10 Category: Tag:


The Atlas PVL10 Car Lift is a 2-post lift with a 10,000 lb. capacity that is designed for professional automotive shops. It features the Double S column design, which offers reliability and can be installed symmetrically or asymmetrically for easy vehicle access and superior vehicle lift point support. Moreover, the lift has three-stage telescoping front arms, double screw rubber/metal adapters with truck height extensions, protective rubber pads, and rubber column guards. Additionally, it comes with an ALLY Hydraulic AL2850 Power Unit that is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada and has a 2-year limited warranty.

The Atlas® PVL10 Car Lift can be installed with the columns positioned symmetrically or asymmetrically. When the columns are installed in an asymmetric configuration, exiting and entering the vehicle is easier and reduces the chance of getting dings or scratches in the door. When the columns are installed in a symmetric configuration, the width between the columns is wider, allowing wider trucks and SUVs to use the lifts easily.  Both column configurations offer easy vehicle access and superior vehicle lift point support due to the three-stage front arm design.


The Atlas PVL10 Car Lift Requires a minimum of 4″ of concrete with a 3000 psi. rating.

Additional Features

  • ALI Certified Lift
  • 10,000 lb. Capacity
  • Column design with special Double “S” bends, increasing column strength
  • Can be installed Symmetrically OR Asymmetrically
  • Overall Height: 135 7/8″ (11′ 3 7/8″) or 139 7/8″ (11′ 7 7/8″) (Cylinder Height 12′ 4″)
  • Padded Carriages
  • 3-Stage Front Arms & 2-Stage Rear Arms
  • Single-Point Lock Release
  • Powder Coat Finish
  • Includes Double Screw-up Adapters
  • Free 8 Piece Truck Adapter Set
  • Mounting Hardware Included
  • Standard with Premium ALLY power unit
  • Shipping Weight: 1,850 lbs.
  • 5 yr Structural – 2 yr Hydraulic – 2 yr Powerunit Warranty

Learn more from the manufacturer here.

Additional information

Weight 1850.00 lbs

10,000 lbs.

Overall Height

135 7/8" (11’ 3 7/8”) or 139 7/8” (11’ 7 7/8”) – (CYLINDER EXTENDS TO 12’ 4”)

Overall Floor Width

Outside Column to Outside Column

130" (10’ 10") Asymmetric/129 1/4” (10’ 9 1/4") Symmetric

Maximum Lift Height (Without Adapters)

72 1/2"

Maximum Lift Height (With Adapters)

81 1/2"

Minimum Arm Height


Inside Column

107 3/4” (8’ 11 3/4”) Asymmetric/ 112 1/2" (9’ 4 1/2") Symmetric

Drive Thru

91” Asymmetric/99 1/2” Symmetric

Column Size

7" x 10 1/4"

Column Thickness of Steel


Base Of Lift

15" x 18"

Motor/Electrical Requirement

220 volt single (1) phase. A 30 amp breaker is recommended

Oil Requirement

3-5 Gallons AW32/AW46 (NOT INCLUDED)

Shipping Weight

1850 lbs.